Recording
DVQX1795 (ENG)
34
Setting the ISO Sensitivity
Recording mode:
Set ISO sensitivity (sensitivity to lighting).
1
Press [ ] button ( )
1
25
2
0
2
Select the ISO sensitivity by rotating the rear or front
dial
ISO sensitivity
• You can change the setting content on the ISO sensitivity screen
from [ISO Displayed Setting] in the [Custom] ([Operation]) menu.
AUTO
ISO sensitivity is automatically set in a range up to 3200
1
depending on
the brightness of a subject.
(Intelligent ISO)
ISO sensitivity is automatically set in a range up to 3200
1
depending on
the movement and brightness of a subject.
[L.80]
2
/ [L.100]
2
/
from [125] to
[12800] / [H.25600]
2
ISO sensitivity is fixed at the selected setting.
1
When [ISO Auto Upper Limit (Photo)] in the [Rec] menu is set to [AUTO].
2
Only when [Extended ISO] in the [Custom] ([Exposure]) menu is [ON].
3
Press [MENU/SET] to set
• You can also press the shutter button halfway to set.
●
Cannot select [ ] in the following cases:
• Shutter-Priority AE Mode
• Manual Exposure Mode
●
You can use the following ISO sensitivity settings when recording in Creative Video Mode, when
recording 4K photos, or when recording using [Post Focus].
• [AUTO], [125] to [6400] ([L.80] to [6400] when [Extended ISO] is set to [ON])
To Next Page
Loading...
