DVQX1795 (ENG)
39
Recording
3
Press the shutter button halfway to exit the menu
4
Press the shutter button to perform recording
• Burst pictures are saved as a single 4K burst file in the MP4 format.
• When [Auto Review] is enabled, the picture selection screen will be displayed automatically.
●
If the surrounding temperature is high or 4K photos are recorded continuously, [ ] may be
displayed and recording may be stopped halfway through. Wait until the camera cools down.
●
When [ ] ([4K Pre-Burst]) is set, the battery drains faster and the camera temperature
rises. (to protect itself, the camera may switch to [
] ([4K Burst]))
Select [
] ([4K Pre-Burst]) only when recording.
●
Recording stops when the continuous recording time exceeds 29 minutes and 59 seconds.
When using an SDHC memory card, files are split into smaller picture files for recording and
playback if the file size exceeds 4 GB. (You can continue to record pictures without interruption.)
If using an SDXC memory card, you can record pictures in a single file even if the size is greater
than 4 GB.
●
When you perform [Light Composition] or [Sequence Composition], we recommend using a tripod
and shutter remote control (DMW-RS2, optional) to prevent camera shake. (→8)
Selecting pictures from 4K burst file and saving
1
Select a picture with the [ ] on the playback screen,
and press
• In the case of recording with [ ] ([4K Pre-Burst]), proceed to
the step
3
.
2
Drag the slide bar to perform rough scene selection
• When [ ] is touched, the marker operation screen appears.
(→40)
3
Drag to select the frame you want to save as a picture
• To continuously rewind/forward the scene or frame-by-frame,
touch and hold [
]/[ ] .
To Next Page
Loading...
