19
DVQP1377
Preparations
Attaching the Lens Cap/Shoulder Strap
Attaching the Shoulder Strap
We recommend attaching the shoulder strap when using the camera to prevent it
from dropping.
1
Pass the shoulder strap through the hole at the
shoulder strap eyelet
• Attach the shoulder strap so that the “LUMIX” Logo is on the
outside.
Shoulder strap eyelet
2
Pass the end of the shoulder strap through the stopper
3
Pass the end of the shoulder strap through the hole on
the other side of the stopper
Pull the shoulder strap 2 cm (0.066 feet) or more.
4
Pull the shoulder strap and then check
that it will not come out
• Perform steps
1
to
4
and then attach the
other side of the shoulder strap.
• Use the shoulder strap around your shoulder.
– Do not wrap the strap around your neck. It
may result in injury or accident.
• Do not leave the shoulder strap where an
infant can reach it.
– It may result in an accident by mistakenly
wrapping around the neck.
To Next Page
Loading...
