214
DVQP1377
Using Menu Functions
Menu list
3
Press [MENU/SET] to finalise the setting
• The screen in step
2
reappears. To set another item, repeat steps
2
to
3
.
4
Press to select [Begin Processing] and press [MENU/SET]
■
Setting each item
When you select an item, the setting screen appears.
Operation
Touch
operation
Description
Drag Used to make adjustments
[WB K Set]
Used to display the colour
temperature setting screen (→103)
(Only when [White Balance] is set
to [
] )
[Adjust.]
Used to display the White Balance
fine adjustment screen (→105)
(Only when [White Balance] is set)
[DISP.] [DISP.]
Used to display the comparison
screen
[MENU/SET] [Set]
Used to finalise an adjustment you
just made and to return to the item
selection screen
SetSet
SetSetAdjust.Adjust.
• If you have selected [Noise Reduction], [i.Resolution], or [Sharpness], the comparison
screen is not displayed.
• Pictures can be enlarged by operating the zoom lever.
• You can also zoom in by quickly touching the touch screen twice. (If the display was
enlarged, it returns to the same magnification ratio.)
To Next Page
Loading...
