98
DVQP1377
Focus, Brightness (Exposure) and Colour tone Settings
Taking pictures with Manual Focus
■
To change the position of an enlarged display
Press
Use to move the position of the enlarged display
• To return the position of the enlarged display to the centre → Press [DISP.] button
Press [MENU/SET]
Operation Touch operation Description
—
Pinch in /
Pinch out
Enlarges/reduces the screen in small steps.
— Enlarges/reduces the screen in large steps.
*
1
*
1
Switches the enlarged display. (windowed/full screen)
*
2
*
1
This setting is not available in Intelligent Auto Mode.
*
2
The image of a part of the screen can be enlarged or reduced approximately 3 to 6 times.
The image of the entire screen can be enlarged or reduced approximately 3 to 10 times.
5
Press the shutter button halfway
• The recording screen will be displayed.
• The same operation can be performed by pressing [MENU/SET].
Quickly adjusting the focus using Auto Focus
In Manual Focus, the focus can be set on the subject through Auto Focus.
1
Touch [ ]
• Auto Focus is activated at the centre of the frame.
• Auto Focus also works with the following operations.
– Pressing the [AF/AE LOCK] button to which [AF-ON] is
assigned (→99)
– Pressing the function button to which [AF-ON] is assigned
– Dragging the monitor and releasing your finger at the position
you want to focus on
• This function cannot be used when [4K Live Cropping] is set.
To Next Page
Loading...
