Panasonic Lumix DC-G95 Basic Owner's Manual

Preparation/Basic
22
DVQX1749 (ENG)
At the time when this camera is purchased, the monitor is stowed in the camera body.
Bring out the monitor as shown below.
1 Open the monitor. (It opens up to 180o.)
2 It can be rotated 180o forward.
3 Return the monitor to its original position.
• The clock is not set when the camera is shipped.
1 Turn the camera on.
2 Press [MENU/SET].
3 Press 3/4 to select the language, and press [MENU/
SET].
4 Press [MENU/SET].
5 Press 2/1 to select the items (year, month, day,
hour, minute), and press 3/4 to set.
6 Press [MENU/SET] to set.
7 When [The clock setting has been completed.] is
displayed, press [MENU/SET].
8 When [Please set the home area] is displayed, press
[MENU/SET].
9 Press 2/1 to select the home area, and then press
[MENU/SET].
Changing the Monitor Position
¥ When rotating the monitor, be careful not to apply too much force. Doing so may cause
damage.
¥ When not using the monitor it is recommended that you close it with the screen facing inward
to prevent dirt and scratches.
Setting the Clock (When Turning On for the First Time)
DC-G95PP-DVQX1749_eng.book 22 ページ ２０１９年３月２９日 金曜日 午後１時３１分

Panasonic Lumix DC-G95 Specifications

General

Camera Type	Mirrorless
Sensor Type	Live MOS
Effective Pixels	20.3 MP
Image Processor	Venus Engine
Autofocus System	Contrast Detection AF
Shutter Speed	1/4000 to 60 sec
Continuous Shooting	9 fps
Built-in Flash	Yes
External Flash	Hot Shoe
Connectivity	Wi-Fi, Bluetooth
Battery	DMW-BLC12
Dimensions	130.4 x 93.5 x 77.4 mm
Weather Sealing	Yes
Sensor Size	17.3 x 13 mm
Image Stabilization	5-axis sensor-shift image stabilization
Viewfinder	Electronic, 2.36M dots
LCD Screen	3.0-inch Free-Angle Touchscreen, 1, 240k dots
Video Recording	4K/30p
Battery Life	Approx. 290 shots (CIPA standard)
Weight	536 g (with battery and SD card)
Image Sensor Format	Four Thirds
ISO Sensitivity	200-25600 (expandable to 100-25600)