23
Preparation/Basic
(ENG) DVQX1324
Allows you to set the aperture, shutter speed, and other settings when in / / /
modes.
You can switch to the camera setting that enables the assigned function.
You can set the items to be assigned to the function lever in [Fn Lever Setting] in the
[Custom] ([Operation]) menu. (P33)
Change the function lever position.
Mode dial Front dial Rear Dial
Programme Shift Programme Shift
Aperture value Aperture value
Shutter speed Shutter speed
Aperture value Shutter speed
Joystick
The joystick can be operated in two ways: it can be
moved up, down, left or right, or it can be pressed.
The joystick provides the same functions as the cursor
buttons/[MENU/SET] button.
Moving:
Selection of items or setting of values etc., is
performed.
Pressing:
Confirmation of setting contents, etc., is
performed.
• In these operating instructions, the up, down, left and
right of the joystick are expressed as 3/4/2/1.
Moving Pressing
Function lever
MODE1
The normal setting where the assigned
function is disabled.
MODE2
The setting where the assigned function is
enabled.
DC-G9LMBodyEB-DVQX1324_eng.book 23 ページ ２０１７年１１月１３日 月曜日 午前１０時４１分
To Next Page
Loading...
Need help?
General
