Preparation/Basic
26
DVQX1324 (ENG)
Press [LVF].
A [LVF] button
B Eye sensor
• The monitor/viewfinder will switch as follows:
– Automatic viewfinder/monitor switching
¢
– Viewfinder display
¢
– Monitor display
¢ If [Eye Sensor AF] in the [Custom] ([Focus / Release Shutter]) menu is set to [ON], the
camera automatically adjusts the focus as the eye sensor is activated. The camera does not
beep when focus is achieved with [Eye Sensor AF].
∫ Notes on automatic viewfinder/monitor switching
Bring your eye or an object near the viewfinder to automatically switch to the viewfinder
display using the eye sensor.
• To reduce the battery consumption, set [Power Save LVF Shooting] in [Economy].
Press [V.MODE].
• The magnification factors that can be switched between differ
depending on the [LVF/Monitor Disp. Set] setting in the [Custom]
([Monitor / Display]) menu.
– [ ] (Viewfinder Style): Two levels
– [ ] (Monitor Style): Three levels
Press [DISP.].
You can select separate screen display styles for the viewfinder and the monitor.
[LVF] button (Switching the Monitor/Viewfinder)
Change the display magnification of the viewfinder
[DISP.] button (Switching the displayed information)
In Recording Mode
> [Custom] > [Monitor / Display] > [LVF/Monitor Disp. Set] >
[LVF Disp. Set]/[Monitor Disp. Set]
[] (viewfinder style)
Scales down images slightly so that you can better review the
composition of the images.
[] (monitor style)
Scales images to fill the entire screen so that you can see their
details.
DC-G9LMBodyEB-DVQX1324_eng.book 26 ページ ２０１７年１１月１３日 月曜日 午前１０時４１分
To Next Page
Loading...
Need help?
General
