85
Menu
(ENG) DVQX1324
Set the way recording to the card slots 1 and 2 is performed.
Notes on the Relay Rec. function
• In the following cases, recording cannot be relayed to the other card:
– When recording a motion picture in [AVCHD] format
Notes on the Backup Rec. function
• We recommend using cards with the same Speed Class rating and capacity.
• When recording a motion picture in [AVCHD] format, backup recording of motion picture is not
possible. Data will be recorded only to the one card.
• When different types of cards (SDHC/SDXC) are inserted in any of the following situations,
recording cannot be performed to the cards:
– When recording motion pictures (Excluding [AVCHD])
– When recording 6K/4K photos
– When recording with the Post Focus function
[Double Slot Function]
> [Setup] > [Double Slot Function]
[Recording
Method]
([Relay Rec])
Relays recording to the other card slot even after the first card
runs out of free space during recording.
[Destination Slot]: [ ]/[ ]
• If you keep replacing the full card before the other card runs
out of free space during motion picture recording, you can
perform recording for a long period of time using 3 or more
cards. Replace the card when there is still sufficient free space
left on the card being used for recording.
([Backup Rec])
Records same images to the two cards.
([Allocation
Rec])
Allows you to specify the card slot to be used for recording for
different image formats.
[JPEG Destination]/[RAW Destination]/[6K/4K Photo
Destination]/[Video Destination]
MENU
DC-G9LMBodyEB-DVQX1324_eng.book 85 ページ ２０１７年１１月１３日 月曜日 午前１０時４１分
To Next Page
Loading...
Need help?
General
