97
Wi-Fi/Bluetooth
(ENG) DVQX1324
∫ Changing the camera’s dial settings, etc. with your smartphone
1 Make a Bluetooth connection to the smartphone. (P91)
2 Operate the smartphone.
• When the camera is turned off, even if you set [Remote Wakeup] to [ON] on the camera, it
cannot be turned on with this function.
> [Setup] > [Wi-Fi] > [Wi-Fi Setup] > [Priority of Remote Device]
[Camera]
Allows you to perform operations with both the camera and the smartphone
during remote recording.
• The camera’s dial settings, etc. cannot be changed with the smartphone.
[Smartphone]
Allows you to perform operations only with the smartphone during remote
recording.
• The camera’s dial settings, etc. can be changed with the smartphone.
• To end remote recording, press any of the buttons on the camera to turn on
the screen, and select [End].
Operating the shutter button with a smartphone via a Bluetooth
connection alone
Wireless connectivity required:
1 Select [ ].
2 Select [Shutter Remote Control].
3 Remotely operate the shutter button or motion picture button of the camera.
• For details, refer to the help section in the “Image App” menu.
• The live view image of the camera cannot be monitored on the smartphone.
• To cancel [Sleep Mode] with this function, select the following settings and connect via
Bluetooth.
– [Remote Wakeup]: [ON] – [Auto Transfer]: [OFF]
MENU
DC-G9LMBodyEB-DVQX1324_eng.book 97 ページ ２０１７年１１月１３日 月曜日 午前１０時４１分
To Next Page
Loading...
Need help?
General
