24
Preparations/Basics
DVQX1391 (ENG)
Shutter button (Taking pictures)
1
Set mode dial to [ ]
• The camera automatically optimises the main settings.
2
Press the shutter button halfway (press lightly) to focus
on the subject
Aperture value
Shutter speed
Focus display (Green)
( When focus is aligned: illuminated
When focus is not aligned: flashing)
• If the aperture value and shutter speed are shown in red and flashing, you do
not have the appropriate exposure, unless you are using the flash.
3
Press the shutter button fully (push the button all the
way), and take the picture
●
Pictures can be taken only when the image is correctly focused as long as
the [Focus/Release Priority] is set to [FOCUS].
■
Check the picture you have taken
Press the [ ] (Playback) button. (→52)
To Next Page
Loading...
Need help?
General
