260
Wi-Fi/Bluetooth
Connecting the camera to a smartphone
Connecting the camera to a smartphone that does not support
for Bluetooth Low Energy
Connect to a smartphone via Wi-Fi.
• You can also connect via Wi-Fi to a smartphone that supports Bluetooth low energy by
following the same steps.
Connecting without using the password
You can easily establish a Wi-Fi connection on this unit without entering a password on
your smartphone.
(On the camera)
→ [Setup] → [Wi-Fi] → [Wi-Fi Function] → [New Connection]
→ [Remote Shooting & View]
SSID
• The information required for directly connecting your smartphone to
this unit (SSID) is displayed.
• You can also display the information by pressing [Wi-Fi] button on
the camera.
(On your smartphone)
1
Turn on the Wi-Fi function in the setting menu
2
Select the SSID displayed on the screen of the camera
3
Start “Image App”
• When the connection confirmation screen appears on the camera, select
[Yes ] and press [MENU/SET]. (Only when making a connection for the
first time.)
[Wi-Fi Password] is set to [OFF] at the time of purchase.
When you start a Wi-Fi connection, be sure to verify that the device displayed on the
camera’s connection confirmation screen is really the device you want to connect to.
Even if the wrong device is displayed, you will still be connected to it if you select “Yes”.
If there seem to be other Wi-Fi enabled devices in the vicinity, we recommend that you
set [Wi-Fi Password] to [ON] (→297).
To Next Page
Loading...
Need help?
General
