46
Wi-Fi/Bluetooth
DVQX1427 (ENG)
■
Lighting of the WIRELESS connection lamp (Blue)
Lit: When the Wi-Fi/Bluetooth function is ON or connected
Blinking: When sending picture data
• In [Wireless Connection Lamp] in the [Setup] menu, you
can set the lamp so that it will not light/flash.
■
[Wi-Fi] button
In this Operating Instructions, a function button to which [Wi-Fi] is assigned is
referred to as the [Wi-Fi] button. (At the time of purchase, [Wi-Fi] is assigned to
[Fn5] in recording mode, and [Fn1] in playback mode.)
• For details on the function button, refer to (→23)
To start up the Wi-Fi function (When in recording mode):
Touch [ ]
Touch [ ]
●
The camera cannot be used to connect to a public wireless LAN connection.
To Next Page
Loading...
