265
Connecting with other devices
Viewing on TV screen
Recording while monitoring camera images
When using the HDMI output, you can take pictures while
monitoring the camera image on a TV, etc.
■
Switching the information displayed
You can change the display shown during HDMI output using [HDMI Info Display (Rec)]
in [TV Connection] on the [Setup] menu.
[ON]: The camera display is output as is.
[OFF]: Only images are output.
●
When using the Auto Focus Mode [ ] or MF assist, the screen cannot be enlarged in windowed
mode.
●
If you use the HDMI output during recording, the aspect ratio setting is fixed to [16:9].
●
An electronic sound or shutter sound will not sound.
●
If you set up a Wi-Fi connection while using the HDMI output, no image will be displayed on the
camera monitor.
●
Some of setting screens are not output through the HDMI connection.
●
This function is not available in the following cases:
• During motion picture recording
• During panorama picture recording
• When recording 4K photos
• When recording using [Post Focus]
To Next Page
Loading...
Need help?
General
