34
Basics
Basic Operation
Zoom Lever (Use Zoom)
You can adjust the area of a picture to be taken using the zoom or control ring.
• You can also use the zoom function from the touch panel. (→149)
• For details about zoom types and use, refer to (→146).
Zoom lever
Control ring
*
1
Move the zoom lever
1
Turn the control ring
*
You can perform zoom operations by assigning
[Zoom] or [Step Zoom] to the control ring.
(→51)
T side: Telephoto, Enlarge the subject
W side: Wide-angle, Capture a wider area
Turning angle is large: Zoom speed is high
Turning angle is small: Zoom speed is low
Clockwise: Telephoto, Enlarge the subject
Counterclockwise: Wide-angle, Capture a wider
area
●
Do not touch the lens barrel during zooming.
●
Adjust the focus after adjusting the zoom.
●
The camera may make a rattling noise and vibrate when the zoom lever or control ring is
operated. This is not a malfunction.
To Next Page
Loading...
