Recording
- 76 -
∫ Setting up [ ] (AF Tracking)
Touch the subject.
• The AF area turns yellow and the subject is locked.
It will continuously adjust the focus and exposure automatically
following the movement of the subject. (Dynamic Tracking)
• Lock is cancelled when [ ] is touched.
Note
•
Touch operation is not possible at the top right of the LCD monitor even if image is displayed.
• Dynamic tracking function may fail to lock, lose the subject in AF tracking, or track different
subject depending on the recording conditions such as the ones below.
–When the subject is too small
–When the recording location is too dark or bright
–When the subject is moving too fast
–When the background has the same or similar colour to the subject
–When jitter is occurring
–When using the zoom
• When the AF lock fails, the Tracking AF frame will flash in red and then disappear. Redo the AF
lock.
• AF Tracking will not operate when the subject is not specified, the subject is lost, or has failed
to be tracked. The picture will be taken with [ ] in [AF Mode] in that case.
• AF Tracking is cancelled when the Touch Shutter is set to [ ].
• It cannot be set to [ ] in the following conditions.
–In [Panorama Assist], [Pin Hole], [Film Grain], or [High Dynamic] in Scene Mode
–In [B/W], [SEPIA], [COOL], or [WARM] in [Color Mode]
To Next Page
Loading...
Need help?
General
Weight and Dimensions
