- 99 -
Connecting to other equipment
Copy images played back with this unit to Blu-ray disc, DVD disc, hard disk, or video using
a Blu-ray Disc Recorder, DVD recorder, or video.
1 Connect this unit with the recording equipment with an AV cable.
2 Start the playback of this unit.
3 Start the recording on the recording equipment.
•
When ending the recording (copying), stop the playback on this unit after stopping the
recording of the recording equipment.
Note
•
When you play back motion pictures on 4:3 aspect ratio TV, you must set [TV Aspect] (P43) on
this unit to [4:3] before starting a copy. The image will be vertically long if you play back motion
pictures copied with [16:9] setting on a [4:3] aspect TV.
• See the operating instructions for the recording equipment regarding the details of copying and
playing back.
Copy the playback image using an AV cable
1 Yellow: to the video input socket
2 White: to the audio input socket
A AV cable
To Next Page
Loading...
