EasyManua.ls Logo

Panasonic LUMIX DMC-FX40

Panasonic LUMIX DMC-FX40
160 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
Advanced (Recording pictures)
- 92 -
About [ƒ]
You can focus on the subject more quickly than in other AF modes.
The picture may stop moving for a moment before being brought into focus when you press the
shutter button halfway. This is not a malfunction.
Setting up [ ] (AF Tracking)
Note
Dynamic tracking function may fail to lock, lose the subject in AF tracking, or track different
subject depending on the recording conditions such as the ones below.
When the subject is too small
When the recording location is too dark or bright
When the subject is moving too fast
When the background has the same or similar colour to the subject.
When jitter is occurring
When using the zoom
If it fails to lock, AF area will flash in red, and disappear. Press 4 again.
AF Tracking will not operate when the subject is not specified, the subject is lost, or has failed
to be tracked. The picture will be taken with [Ø] in [AF MODE] in that case.
[QUICK AF] will not operate during AF tracking.
It is not possible to set [ ] in [STARRY SKY], [FIREWORKS], [PIN HOLE], [FILM GRAIN], or
in the motion picture mode.
It is not possible to set [ ] in [B/W], [SEPIA], [COOL], or [WARM] in [COLOR MODE].
The focus range is 5 cm (Wide)/1 m (Tele) to .
1 Bring the subject to the AF tracking
frame, and press 4 to lock the subject
AF tracking frame will continuously focus on
the subject's movement once the subject is
recognised.
AF tracking is turned off when 4 is pressed
again.
Before locking Locked
2 Take the picture

Table of Contents

Other manuals for Panasonic LUMIX DMC-FX40

Related product manuals