15
Preparation/Basic
(ENG) DVQX1028
• When you turn the camera off or carry the camera, attach the lens cap to protect the surface of
the lens.
• Do not hang or swing around the camera with the lens cap string.
• Make sure to detach the lens cap when turning this unit on.
• Be careful that the lens cap string does not become entangled with the shoulder strap.
A Shoulder strap eyelet
B Pinch here to attach or detach the cap.
1 Pass the string through the hole on the camera.
2 Pass the string through the lens cap, and then pass the lens cap through the loop
formed by the string.
3 Fasten the string.
4 Attach the lens cap.
• We recommend attaching the shoulder strap when using the camera to prevent it from
dropping.
• Perform steps 1 to 8 and then attach the other side of the shoulder strap.
• Use the shoulder strap around your shoulder.
– Do not wrap the strap around your neck.
– It may result in injury or accident.
• Do not leave the shoulder strap where an infant can reach it.
– It may result in an accident by mistakenly wrapping around the neck.
Attaching the Lens Cap
1234
Attaching the Shoulder Strap
DMC-FZ2500P&PP-DVQX1028_eng.book 15 ページ ２０１６年９月１９日 月曜日 午前１１時４９分
To Next Page
Loading...
