21
Preparation/Basic
(ENG) DVQX1028
2 Press the shutter button fully (push it in further), and
take the picture.
• Be careful not to move the camera when you press the shutter button.
• Pictures cannot be taken until focus is achieved when [Focus/Release Priority] is set to
[FOCUS].
• The [Auto Review] function displays the picture you have just
taken.
• To display the picture in Playback Mode, press [(].
Pressing the cursor button:
Selection of items or setting of values etc., is performed.
Pressing [MENU/SET]:
Confirmation of setting contents, etc., is performed.
• This owner's manual express the up, down, left, and right of the cursor button
as 3/4/2/1.
Select the mode by rotating the mode dial.
• Rotate the mode dial slowly to select the desired mode.
Check the picture you have taken
Cursor buttons/[MENU/SET] button
Mode dial (Selecting a Recording Mode)
Intelligent Auto Mode (P26)
The subjects are recorded using settings automatically selected by the camera.
Intelligent Auto Plus Mode (P26)
Allows you to adjust the brightness and color hue when in Intelligent Auto Mode.
1/981/98
1/98
DMC-FZ2500P&PP-DVQX1028_eng.book 21 ページ ２０１６年９月１９日 月曜日 午前１１時４９分
To Next Page
Loading...
