23
Preparation/Basic
(ENG) DVQX1028
Using the [ND FILTER] switch, you can switch the built-in
optical ND filter setting. (The filter adjusts the amount of
light.)
• Use this function when recording a bright subject outdoors
under a clear sky that causes the screen to look white.
Touch screen of this unit is capacitive. Touch the panel directly with your bare finger.
∫ Touch
To touch and release the touch screen.
• When selecting features using the touch screen, be sure
to touch the center of the desired icon.
∫ Drag
A movement without releasing the touch screen.
This can also be used to move to the next image during
playback, etc.
∫ Pinch (enlarge/reduce)
Pinch the touch screen apart (enlarge) or together
(reduce) with two fingers.
[ND FILTER] switch (switching the ND filter setting)
[AUTO] Controls the ND filter automatically according to the recording condition.
[1/4] Reduces the amount of light to 1/4.
[1/16] Reduces the amount of light to 1/16.
[1/64] Reduces the amount of light to 1/64.
[OFF] Does not use the ND filter.
Touch screen (Touch operations)
ND
FILTER
1/64
1/16
1/4
AUTO
OFF
Fn9
Fn8
Fn10
Fn11
SNAP
Fn12
DMC-FZ2500P&PP-DVQX1028_eng.book 23 ページ ２０１６年９月１９日 月曜日 午前１１時４９分
To Next Page
Loading...
