Recording
28
DVQX1028 (ENG)
1
Set the focus mode lever to [MF].
2
Press 2 ().
3
Press 3/4/2/1 to determine the area to be
enlarged, and press [MENU/SET].
• The assist screen is displayed, enlarging the area. (MF
Assist)
• You can also adjust the focus position by dragging (P23)
the screen.
• Pressing [DISP.] resets the focus position back to the
center.
4
Operate the focus ring to set the focus.
Rotate to A side:
Focuses on nearby subject
Rotate to B side:
Focuses on faraway subject
A MF Assist (enlarged screen)
B Peaking
C MF Guide
• The in-focus portions will be highlighted. (Peaking)
• You can check whether the point of focus is to the near
side or to the far side. (MF Guide)
You can perform the following operations:
5
Press the shutter button halfway.
• The assist screen will close. The recording screen will be displayed.
• You can also close the assist screen by pressing [MENU/SET].
Button operation Touch operation Description of operation
3/4/2/1 Dragging Moves the enlarged area
Pinching out/in Enlarges/reduces the screen in small steps.
s Enlarges/reduces the screen in large steps.
s Switches the enlarged display (windowed/full screen)
[DISP.] [Reset] Resets the area to be enlarged back to the center.
A
B
DMC-FZ2500P&PP-DVQX1028_eng.book 28 ページ ２０１６年９月１９日 月曜日 午前１１時４９分
To Next Page
Loading...
