31
Recording
(ENG) DVQX1028
3
Press the shutter button halfway to exit the menu.
4
Press the shutter button to perform recording.
• The camera will perform burst recording of a 4K photo and
saves it as a 4K burst file in [MP4] format.
• When [Auto Review] is enabled, the picture selection screen
will be displayed automatically.
• When [ ] ([4K Pre-Burst]) is set, the battery drains faster and the camera temperature
rises. Select [ ] ([4K Pre-Burst]) only when recording.
1 Select an image with the [ ] icon on the playback screen, and
press 3.
• If the image was recorded with [ ] ([4K Pre-Burst]), proceed to step 3.
2 Drag the slide bar to make a rough selection of
scenes.
3 Drag the frames to select the frame you want to save
as a picture.
4 Touch [ ] to save the picture.
• The picture will be saved in JPEG format.
Selecting pictures from 4K burst file and saving
You can save pictures taken during a 5 second period at once by using [4K PHOTO
Bulk Saving] in the [Playback] menu.
DMC-FZ2500P&PP-DVQX1028_eng.book 31 ページ ２０１６年９月１９日 月曜日 午前１１時４９分
To Next Page
Loading...
