Wi-Fi
58
DVQX1028 (ENG)
1 Connect to a smartphone. (P56)
2 Operate the smartphone.
1 Connect to a smartphone. (P56)
2 Operate the smartphone.
You can send location information acquired with a smartphone to the camera. After
sending the information, you can also write it on images stored in the camera.
1 Start recording location
information
2 Start recording images
3 Finish recording the location
information
4 Sending and writing location
information
∫ Operate the smartphone
1 Connect to a smartphone. (P56)
2 Select [ ].
3 Select [Geotagging].
4 Select an icon.
Saving images stored in the camera
1 Select [ ].
2 Touch and hold an image, and drag it to save it.
• You cannot save pictures in RAW format, motion pictures in [AVCHD], [MP4] (only those
recorded with their size set to [4K] in [Rec Quality]), [MP4(LPCM)] or [MOV] format, 4K
burst files, and images recorded with the [Post Focus].
Sending images in the camera to an SNS
1 Select [ ].
2 Touch and hold an image, and drag it to send it to an SNS, etc.
• The image is sent to a web service such as an SNS.
Adding location information to images stored in the camera from a
smartphone/tablet
Start/stop recording location information.
• The smartphone battery drains faster while location information is being recorded.
When recording of location information is not necessary, stop it.
Sending and writing location information.
• Follow the on-screen messages to operate the smartphone.
• Images with location information are indicated with [ ].
GPS
DMC-FZ2500P&PP-DVQX1028_eng.book 58 ページ ２０１６年９月１９日 月曜日 午前１１時４９分
To Next Page
Loading...
