11
(ENG) VQT3R47
This document expresses the up, down, left, and right of the cursor button as
follows, or as 3/4/2/1.
Cursor button:
Selection of items or setting of values etc., is performed.
[MENU/SET] button:
Confirmation of setting contents, etc., is performed.
There are 2 ways to operate the rear dial, rotating left or right, and deciding by
pressing.
Rotating:
Selection of items or setting of values is performed during the various
settings.
Pressing:
Operations that are the same as [MENU/SET] button, such as determine
settings, etc., are performed during the various settings.
• Rear dial is described as follows in these operating instructions.
Cursor buttons/[MENU/SET] button
e.g.: When you press the 4 (down) button
or Press 4
Rear Dial
e.g.: Rotating left or right e.g.: Pressing the rear dial
DMC-FZ48&FZ47GN-VQT3R47_eng.book 11 ページ ２０１１年７月１３日 水曜日 午前９時２０分
To Next Page
Loading...
