- 16 -
Preparation
Attaching the Lens Cap/Shoulder Strap
∫ Attaching the Lens Cap
•
When you turn the camera off or carry the camera, attach the lens cap to protect the surface of the
lens.
1
Pass the string through the hole on the camera.
2
Pass the same string
through the hole on the lens
cap.
3
Attach the lens cap.
• Do not hang or swing around this unit.
• Make sure to detach the lens cap when turning this unit
on.
• Be careful not to lose the lens cap.
• Be careful that the lens cap string does not become
entangled with the shoulder strap.
∫ Attaching the Shoulder Strap
•
We recommend attaching the shoulder strap when using the camera to prevent it from
dropping.
1
Pass the shoulder strap through the hole at the
shoulder strap eyelet.
2
Pass the shoulder strap through the stopper and
fasten the shoulder strap.
A Pull the shoulder strap 2 cm (0.066 feet) or more.
• Attach the shoulder strap to the other side of the camera being
careful not to twist it.
To Next Page
Loading...
