17
(ENG) VQT4H57
Attaching the Lens Hood (DMC-FZ200)
• Check that the camera is turned off.
• Close the flash.
1
Attach the lens hood into the
lens with the short side aligned
with the bottom of the main
unit.
•
Do not hold the lens hood in a way that
twists or bends it.
2
Rotate the lens hood in the direction of the
arrow.
3
You will feel some stiffness just before the
mark, but continue to rotate the lens hood
to A where the marks align.
(The lens hood will stop with a “click”.)
•
Check that the lens hood is firmly attached and that it
does not appear in the picture.
Note
• When temporarily detaching and carrying the lens hood, attach the
lens hood to the lens in the reverse direction. Return it to the normal
direction when taking pictures.
DMC-FZ200&FZ60_EB-VQT4H57_eng.book 17 ページ ２０１２年７月３日 火曜日 午後１時５０分
To Next Page
Loading...
