Advanced (Recording pictures)
AF area can be moved when [r_:] is selected. The size of AF area can also be changed.
1 Touch the subject.
• AF area setting screen is displayed.
• Press and hold the [QMENU] button until the AF area
setting screen is displayed. AF area can then also be
moved by pressing the cursor button toward A/V/_I/
I_.
• The AF area can be set freely at a position on the
screen. (It cannot be set to edge of the screen)
• The AF area returns to the center when [-@]is pressed.
• When the [FOCUS AREA SET] is set to [Fn BUTTON SET] (P136), AF area setting
screen can also be displayed by pressing V.
2 Touch the slide bar to change the size of the AF
area frame.
• It can be changed to 4 different sizes of "spot" (_,
"normal" (_, "large" @, and "extra large" @.
• It is also possible to rotate the rear dial to the right to
make it larger. Rotate it to the left to make it smaller.
3
Touch [SET].
• AF area with same function as [[_]] is displayed in the
touched position, with the Face Recognition frame still
displayed.
• AF area will turn yellow, and Face Recognition frame
will turn white.
• Setting of the AF area frame is canceled when
[CANCEL] is touched.
80 VQT2S30
To Next Page
Loading...
