Advanced (Recording pictures)
[REC] Mode_ _ '_
Taking Pictures that match the Scene being [
recorded Scene Mode)
When you select a Scene Mode to match the subject and recording situation, the camera
sets the optimal exposure and hue to obtain the desired picture.
Set the mode dial to [_].
_ Press AI,14111_ to select the Scene Mode.
• You can also use the rear dial to select.
_ Press [MENU/SET] to set.
• The menu screen is switched to the recording screen in the
selected Scene Mode.
• About the information B
• If you press [DISPLAY] when selecting a Scene Mode in step 2,
explanations about each Scene Mode are displayed. (if you press
[DISPLAY] again, the screen returns to the Scene Mode menu.)
• To change the Scene Mode, press [MENU/SET], and return to above step 2 by pressing I,-,
while selecting the Scene Mode menu [$CN] by pressing A/V/_I/I_.
• The Scene Mode flash setting is reset to the initial setting when the Scene Mode is changed
and then used.
• When you take a picture with a Scene Mode that is not adequate for the purpose, the hue of the
picture may differ from the actual scene.
• The following items cannot be set in Scene Mode because the camera automatically adjusts
them to the optimal setting.
- [SENSITIVlTY]/Items other than [STANDARD] and [STANDARD] ( _ ) in Film Model
[METERING MODE]/[FLASH SYNCHRO] _Ill.RESOLUTION]Ill.EXPOSURE]/
[ISO LIMIT SET]/[DIGITAL ZOOM]
Can be set only when [PERIPHERAL DEFOCUS] is set.
Select this when you want to take pictures of a sunset view. This allows you to take vivid
pictures of the red color of the sun.
• The flash setting is fixed to [(_].
• The initial setting for the AF Mode is [[]].
VQT2S30 103
To Next Page
Loading...
