Advanced (Recording pictures)
• During Motion Picture Recording, settings for My Color Mode are used.
• My Color settings are memorized even if the camera is turned off.
•Auto Bracket cannot be used in My Color Mode.
• ISO sensitivity will be fixed to [AUTO].
• [I.EXPOSURE], [COLOR SPACE] can be set only when the My Color Mode is set to
[CUSTOM].
• The following items cannot be set in My Color Mode because the camera automatically adjusts
them to the optimal setting.
- [FILM MODE]/[FLASH]/[FLASH SYNCHRO]/[ISO LIMIT SET]
By selecting [CUSTOM], you can take pictures with color, brightness and saturation
adjusted to desired levels.
_ Touch [_1]/[1_] [CUSTOM].
to select
_ Touch the item.
_ [COLOR] This will adjust the color of the image from red light to blue
light. (11 steps in ±5)
This will adjust the brightness of the image.
(11 steps in +5)
This will adjust the color intensity of the image from black
_[SATURATION] and white to vivid color.
(11 steps in +5)
Return all settings to default
_ Touch the slide bar.
_ Touch [SET].
• You can also press the shutter button halfway to set.
• Recording screen is displayed.
• Return [CUSTOM] settings to default
1 Select [RESET] in above step 2.
2 Touch [YES].
• Adjusted value for each item returns to standard (center point).
•Adjustments made with [CUSTOM] are not in effect in other Recording Modes.
• Icons for the adjusted items are displayed in the screen when the [CUSTOM] are adjusted.
Displayed icon is the one for direction of adjustment.
•AF tracking may not function if you adjust [SATURATION] to make the color lighter.
VQT2S30 107
To Next Page
Loading...
