Advanced (Recording pictures)
• In the Quick Menu (P34) while in button operation, if set to [_] (LCD monitor style), exposure
compensation can be set with ,i./V after selecting to display exposure compensation with
_1/1_ or the rear dial.
• In the Quick Menu (P34) while in button operation, if set to [El] (viewfinder style), after
selecting the Exposure Compensation display using the rear dial or 4/1_, pressing the rear dial
or [MENU/SET] will allow you to compensate the exposure with the rear dial or 4/1_.
Taking Pictures usin 9 Burst Mode
Pictures are taken continuously while the shutter button is pressed.
Select the ones you really like from among the pictures you have taken.
Set the drive mode lever to [ [_ ].
_ Focus on the and take a
subject picture.
(_ When Burst Mode is set to high speed [H].
• Hold down the shutter button fully to activate the
Burst Mode.
• Changing the burst speed
1 Select [BURST RATE] in the [REC] Mode menu. (P32)
2 Press A/T to select the burst speed and then press
[MENU/SET].
3 Press [MENU/SET] to close the menu.
• You can also press the shutter button halfway to close the menu.
[H] ' [M] , [L]
(High speed) (Middle speed) (Low speed)
Burst speed (pictures/second) 3.2 2.6 2
Live View during Burst Mode None Available Available
With RAW files 4 to 7 12
1
Without RAW files Depends on the remaining capacity of the card 2
il Number of recordable pictures
i2 Pictures can be taken until the capacity of the card becomes full. However the burst speed
will become slower halfway. The exact timing of this depends on the aspect ratio, the picture
size, the setting for the quality and the type of card used.
VQT2S30 73
To Next Page
Loading...
Need help?
General
