Advanced (Recording pictures)
For details on the [SETUP] menu settings, refer to P32.
You can display the local times at the travel destinations and record them on the pictures
you take.
• Select [CLOCK SET] to set the current date and time in advance. (P30)
Select [WORLD TIME] from the [SETUP] menu,
and then press I_.
• When first using the camera after purchasing it, the [PLEASE
SET THE HOME AREA] message appears. Press
[MENU/SET], and set the home area on the screen in step 3.
Press • to select [HOME], and then press
[MENU/SET].
Press _1/1_ to select the home area, and then
press [MENU/SET].
Current time
Time difference from GMT (Greenwich Mean Time)
• If daylight saving time [_] is used at the home area,
press •. Press • again to return to the original time.
• The daylight saving time setting for the home area does not
advance the current time. Advance the clock setting by one hour.
Press • to select [DESTINATION] and then
press [MENU/SET] to set.
Depending on the setting, the time at the travel destination
area or the home area is displayed.
_ Press _1/1_to select the the travel destination @
area
is in and then press [MENU/SET] to set.
Current time of the destination area
Time difference
• If daylight saving time [_] is used at the travel
destination, press •. (The time advances by one hour.)
Press • again to return to the original time.
_ Press [MENU/SET] to close the menu.
• Return the setting to [HOME] when the vacation is finished by performing steps 1, 2 and 3.
• If [HOME] is already set, change only the travel destination, and use.
• If you cannot find the travel destination in the areas displayed on the screen, set by the time
difference from the home area.
VQT2S30 125
To Next Page
Loading...
