Advanced (Recording pictures)
_ these settings if you need to.
Usin 9 the [CUSTOM] Menu
• In the Intelligent auto mode, only [GUIDE LINE], [LCD INFO.DISP.] and [REMAINING DISP.]
can be set.
For details on how to select the [CUSTOM] menu settings, refer to P32.
Up to 3 current camera settings can be registered as custom
settings.
[CUST. SET MEM,] [01]
[C2]
[03]
• Refer to P108 for details.
Assign [REC] Mode menu or [CUSTOM] menu to • button. It is
convenient to register functions that are used often.
[Fn BUTTON SET] [FOCUS AREA SET]/[ASPECT RATIO]/[QUALITY]/
[METERING MODE]I[I.RESOLUTION]I[I.EXPOSURE]I
[EX. OPT. ZOOM]I[GUlDE LINE]I[°/_ REC AREA]I
[REMAINING DISP.]
• When set to [FOCUS AREA SET], it is possible to display the position setting screen of either
AF area or MF assist by pressing V. Refer to P48, 79 and 83 for details.
• Refer to P126 for details about [REC] Mode menu.
• The camera will not be able to operate with ,LI5'1411_ if the [DIRECT FOCUS AREA] (P138) is
set to [ON]. Set using the Quick Menu (P33).
This allows you to set either to display or not display the
histogram. (P65)
[HISTOGRAM] [OFF]
[ON]: Position of the histogram can be set. Refer to P66 on
how to set.
This will set the pattern of guide lines displayed when taking a picture.
(P65)
[GUIDE LINE] [OFF]/[_]]/[_]
[!::::_]: Position of the guide line can be set. Refer to P65 for
how to set.
When the Auto Review function is activated or when playing back,
[HIGHLIGHT] white saturated areas appear blinking in black and white.
[OFF]/[ON]
136 VQT2S30
To Next Page
Loading...
