15
(ENG) VQT3Q80
In bright sunlight or backlight, the lens hood will minimize lens flare and ghosting. The lens
hood cuts off excess lighting and improves the picture quality.
To attach the lens hood (flower shape) that came with the interchangeable lens
(H-FS014042)
•
The interchangeable lens (H-H014 or H-PS14042) does not have a lens hood.
Insert the lens hood into the lens with the short sides at the top and
bottom, and turn in the direction of the arrow until it stops.
A Fitting to the mark.
Note
•
When temporarily detaching and carrying the lens hood, attach the lens
hood to the lens in the reverse direction.
Attaching the Lens Hood
VQT3Q80~Body1_eng.fm 15 ページ ２０１１年９月５日 月曜日 午後２時３５分
To Next Page
Loading...
