9. Using Menu Functions
202
Applicable modes:
The camera automatically removes noise that appears when the shutter speed becomes
slower to take pictures of night scenery etc. so you can take beautiful pictures.
Settings: [ON]/[OFF]
•
[Long shutter noise reduction ongoing] is displayed for the same time as the shutter speed for
signal processing.
Not available in these cases:
•
This function is not available in the following cases:
– When recording motion pictures
– When [Burst Rate] is set to [SH]
– When recording 4K photos
– When recording with [Post Focus]
– When using the electronic shutter
Applicable modes:
When the screen periphery darkens as a result of the lens characteristics, you can record
pictures with the brightness of the screen periphery corrected.
Settings: [ON]/[OFF]
•
Compensation effect may not be achieved depending on the recording conditions.
• Noise in the periphery of the picture may stand out with higher ISO sensitivity.
Not available in these cases:
•
Correction is not possible in the following cases:
– When recording motion pictures
– Recording still pictures while recording a motion picture (only when set to [ ] ([Video
Priority]))
– When [Burst Rate] is set to [SH]
– When recording 4K photos
– When recording with [Post Focus]
[Long Shtr NR]
> [Rec] > [Long Shtr NR]
[Shading Comp.]
> [Rec] > [Shading Comp.]
MENU
To Next Page
Loading...
