221
9. Using Menu Functions
[Travel Date]
(continued)
• You can display the elapsed days and travel destination
during playback or stamp them on recorded pictures in
[Text Stamp] (P241).
• The number of days that have passed since the departure
date can be printed out using the software
“PHOTOfunSTUDIO”
(P296).
• The travel date is calculated using the date in the clock
setting and the departure date you set. If you set [World
Time] to the travel destination, the travel date is
calculated using the date in the clock setting and the
travel destination setting.
• The [Travel Date] feature is disabled when recording
[AVCHD] motion pictures.
• [Location] cannot be recorded in the following cases:
– When recording motion pictures
– When recording 4K photos
– When recording with [Post Focus]
s
[Wi-Fi]
[Wi-Fi Function] P251
[Wi-Fi Setup] P288
[Beep]
This allows you to set the volume for electronic sound and
the electronic shutter sound.
[Beep Volume]/[E-Shutter Vol]/[E-Shutter Tone]
• When [Silent Mode] is set to [ON], [Beep Volume] and
[E-Shutter Vol] are set to [OFF].
s
[Live View Mode]
Set the frame rate of the recording screen (Live View
screen).
[30fps]:
Reduces the power consumption, extending the operating
time.
[60fps]:
Displays movements smoother.
• When [Live View Mode] is set to [30fps] the image quality
on the recording screen may be worse than when it is set
to [60fps], but this does not affect the recorded image.
• The viewfinder is fixed to [60fps].
s
> [Setup]
MENU
To Next Page
Loading...
