Recording
• Auto White Balance
Depending on the conditions prevailing when pictures are taken, the pictures may take on
a reddish or bluish tinge. Furthermore, when a multiple number of light sources are being
used or there is nothing with a color close to white, Auto White Balance may not function
properly. In this case, set the White Balance to a mode other than [AWB].
1 Auto White Balance will work within this range
T0000
2 Blue sky 9000___)3)¢_S_
3 Cloudy sky (Rain) _ .....
4 Shade | 7000_j_4)1_
5 Sunlight 1) G°°°_-- 5)_
6 White fluorescent light 5ooo_
7 Incandescent light bulb 4ooo_
8 Sunrise and sunset 3ooo_ 7) ;.)
9 Candlelight
_ooo__ 8)_
K Kelvin Color Temperature --9)
Set the White Balance value. Use to match the condition when taking photographs.
1
2
Select [_SET] and then press [MENU/SET].
Aim the camera at a sheet of white paper etc. so that the
frame in the center is filled by the white object only and then
press [MENU/SET].
• White Balance may not be set when the subject is too bright or too
dark, Set the White Balance again after adjusting to appropriate
brightness.
• Exit the menu after it is set.
- 84 -
To Next Page
Loading...
Need help?
General
