Playback/Editing
You can copy the data of the pictures you have taken from the built-in memory to a card or
from a card to the built-in memory.
_ Select [Copy] on the [Playback] menu. (P42)
_ ress All' to select the copy destination and then press
[MENU/SET].
[_..,_] ([IN-->SD]): All the picture data in the built-in memory are copied onto the
card at one time.
[r_,.._.l_]([SD-->IN]): One picture at a time is copied from the card to the built-in
memory.
Press </1_ to select the picture and then press [MENU/SET].
• Confirmation screen is displayed. It is executed when [Yes] is selected.
Exit the menu after it is executed.
• Do not turn the camera off at any point during the copying process.
• If a picture exists with the same name (folder numberlfile number) as the picture to be copied in
the copy destination when [_.._,r_] is selected, a new folder is created and the picture is copied.
If a picture exists with the same name (folder numberlfile number) as the picture to be copied in
the copy destination when [_"t_:]] is selected, that picture is not copied.
• It may take time to copy the picture data.
• [Print Set], [Protect] or [Favorite] settings will not be copied. Perform the settings again after
copying is finished.
-113-
To Next Page
Loading...
