Others
• Is the camera connected to the PC correctly?
• Is the camera recognized by the PC correctly?
Select [PC] when connecting. (P120)
Disconnect the USB connection cable. Connect it again while the card is inserted in the
camera.
If there are two or more USB terminal on a single PC, try connecting the USB connection
cable to another USB terminal.
Check if your PC is compatible with SDXC memory cards.
http:llpanasonic.netlavclsdcardlinformationlSDXC.html
A message prompting to format the card may be displayed when connecting, but do not
format.
If the [Access] displayed on the LCD monitor does not disappear, disconnect the USB
connection cable after turning off the power.
Confirm that the Iogin information (Iogin ID/user name/mail address/password) is correct.
Confirm that the PC is connected to the Internet.
Confirm that resident software such as virus protection software or firewall is not blocking
access to YouTube or Facebook.
Confirm with YouTube or Facebook as well.
• Pictures cannot be printed using a printer that does not support PictBridge.
Select [PictBridge(PTP)] when connecting. (PI23)
When using a printer with a Cropping or borderless printing function, cancel this function
before printing. (For details, refer to the operating instructions for the printer.)
When you order photo studios to print pictures, ask the photo studio if the 16:9 pictures can
be printed.
• Since aspect ratio of a panorama picture differs from normal pictures, it may not always be
possible to print it correctly.
Please use a printer that supports panorama pictures. (For details, please see the
operating instructions of your printer)
We recommend using the "PHOTOfunSTUDIO" software on the CD-ROM (supplied) to
adjust the size of the still picture to the print paper size.
- 148-
To Next Page
Loading...
