55
SQT1166 (ENG)
Others
1
[h], [m] and [s] indicate “hour”, “minute” and “second”.
2
This is displayed for about 5 seconds when the camera is turned on if the [Profile Setup]
setting is set.
3
This is displayed for about 5 seconds when the camera is turned on, after setting the clock
and after switching from Playback Mode to Recording mode.
4
This is displayed during countdown.
5
Values given are examples for DMC-ZS100. The values you can set may vary depending on
the model.
6
It is possible to switch the display between the number of recordable pictures and available
recording time with the [Remaining Disp.] setting in the [Custom] menu.
• The information displayed, such as histograms, magnifications, and numeric
values, are only for the purpose of reference.
To Next Page
Loading...
