- 127 -
Wi-Fi
2 Operate the smartphone/tablet.
•
Once the connection is complete, the image from the camera will be displayed on the screen of
the smartphone/tablet.
(After this operation, it may take a while for the connection to be completed.)
• The connection method differs according to your smartphone/tablet.
If you are using an iOS device
When scanning the QR code to set up a connection
(If you are reconnecting the camera, steps 1 to 5 are not required)
1 Start “Image App”. (P125)
2 Select [QR code], and then select [OK].
3 Using “Image App”, scan the QR code displayed on the
screen of the camera.
4 Install the profile of “IMAGE APP”.
•
A message will be displayed on the browser.
• If the smartphone is locked with a passcode, enter the
passcode to unlock the smartphone.
5 Press the home button to close the browser.
6 Turn on the Wi-Fi function in the setting menu of the smartphone/tablet.
7 Select the SSID displayed on the screen of the camera.
8 Return to the home screen, and then start “Image App”.
(P125)
Cancel
Please scan the QR code using "Image App",
or enter the password into Wi-Fi settings
Please set on your smartphone
SSID:
Password:
Change method
DISP.
IMAGE APP
Panasonic Corporation
To Next Page
Loading...
