14 VQT2S91 (ENG) (ENG) VQT2S91 15
Setting the Clock Setting the menu
The Clock is not set when the camera is shipped.
Turn on the power (
A
)
Press [MENU/SET] (
B
) while
the message is displayed
Press ◄► to select the items
(year, month, day, hour, minute,
display order or time display
format), and press ▲▼ to set
• To cancel → Press .
Press [MENU/SET]
Confirm the setting and press
[MENU/SET]
• T
o return to the previous screen, press .
• Turn on the power again and check time
display.
A
B
■
To change time setting
Select [CLOCK SET] from the [REC] or [SETUP] menu, perform and
.
Refer to the following procedures to operate menus such as the [SETUP]
menu, [REC] menu, [TRAVEL MODE] menu and [PLAYBACK] menu.
Example: Setting [LCD MODE] from [OFF] to
in the [PROGRAM
AE] Mode
Press [MENU/SET] to display the menu
Switching to the [SETUP] menu
1 Press ◄.
2 Press ▼ to select the [SETUP] menu
icon [
].
3 Press ►.
• Select a menu item next and set it.
Press ▲▼ to select [LCD MODE]
and then press ►
• Depending on the item, its setting may not
appear or it may be displayed in a different
way.
Press ▲▼ to select and then
press [MENU/SET] to set
Press [MENU/SET] to close the
menu
To Next Page
Loading...
Need help?
General
