- 33 -
Preparation
• The travel destination can be printed out using the “PHOTOfunSTUDIO” bundled software on
the CD-ROM (supplied).
• The text set as [LOCATION] can be edited later with [TITLE EDIT].
• The name for [BABY1]/[BABY2] and [PET] in Scene Mode will not be recorded when
[LOCATION] is set.
• [LOCATION] cannot be recorded when taking motion pictures.
• You cannot set [LOCATION] when [TRAVEL DATE] has been set to [OFF].
[LOCATION]
Set a travel destination. The destination is then recorded when
you take pictures and can be displayed at playback. You can
stamp your pictures with this information using [TEXT STAMP]
(P125).
[OFF]/[SET]
∫ Setting the travel destination
1 Press 4 to select [SET] and then press [MENU/SET].
2 Enter the travel destination.
•
For details on how to enter characters, read the [TITLE EDIT]
section on P123.
3 Press [MENU/SET] to close the menu.
•
The travel destination you have set is displayed in the [TRAVEL
MODE] menu.
∫ To cancel the display of the travel destination
Set [LOCATION] to [OFF] in Step
1 of “Setting the travel
destination”.
Downloaded From camera-usermanual.com Panasonic Manuals
To Next Page
Loading...
