- 91 -
Advanced (Recording pictures)
Useful Functions at Travel Destinations (Travel Mode)
• Select [CLOCK SET] to set the current date and time in advance. (P18)
Select an item from the [TRAVEL MODE] menu, and
press 1 (P22).
• On completion, the set content is displayed.
A The name of the selected menu item is displayed.
Set the departure date and return date of your vacation. The number of days which have
passed since the departure date (i.e. what day of the vacation it is) is then recorded when
you take pictures and can be displayed at playback. You can stamp your pictures with this
information using [TEXT STAMP] (P131).
[OFF]/[SET]
∫ Setting the travel date
1 Press 4 to select [SET] and then press [MENU/SET].
2 Press 3/4/2/1 to set the departure date, and then press
[MENU/SET].
3 Press 3/4/2/1 to set the return date, and then press
[MENU/SET].
•
The frames of dates from the departure date to the return date
undergo a colour change.
4 Press [MENU/SET] to close the menu.
•
The departure date and return date you have set appear in the
[TRAVEL MODE] menu.
∫ Cancelling the travel date
These settings are cancelled automatically when the current date passes the return date.
To cancel the settings part-way through your vacation, set
[TRAVEL DATE] to [OFF] in Step
1 of “Setting the travel date”. Note that when [TRAVEL DATE] is [OFF], [LOCATION] is
also set to [OFF] automatically.
[TRAVEL DATE]
To Next Page
Loading...
Need help?
General
