36
DVQX2185 (ENG)
Materials
Striping or flicker may appear under lighting such as fluorescent or LED
lighting.
• This is characteristic of MOS sensors which serve as the camera’s pickup sensors.
This is not a malfunction.
• When using the electronic shutter, lowering the shutter speed may reduce the
effect of the horizontal stripes.
• If flicker or horizontal stripes are noticeable when recording video, this can be
mitigated by fixing the shutter speed.
Either set [Flicker Decrease (Video)], or fix the shutter speed with the [
] mode.
The brightness or coloring of the recorded image is different from the
actual scene.
• When recording under lighting such as fluorescent or LED lighting, increasing the
shutter speed may introduce slight changes to brightness or coloring.
These are a result of the characteristics of the light source and do not indicate a
malfunction.
• When recording subjects in extremely bright locations or recording under lighting
such as fluorescent, LED, mercury, or sodium lighting, the coloring or screen
brightness may change or horizontal striping may appear on the screen.
The flash does not fire.
• The flash does not fire when using the following functions:
– Video recording/[6K/4K PHOTO]/[Post-Focus]
– [ELEC.]/[Silent Mode]
– [Filter Settings]
When the camera is shaken, a rattling sound is heard from the camera.
• The sound is caused by the in-body stabilizer. This is not a malfunction.
There is rattling noise from the lens when the camera is turned on or
off, or when the camera is swung.
There is a sound from the lens when recording.
• This is the sound of the lens moving and aperture operation. It is not a malfunction.
To Next Page
Loading...
Need help?
General
