7
VQT3S51
Names and Functions of
Components
1 Lens surface
2 Zoom lever
Move the zoom lever to the [T]
(Tele side) or [W] (Wide side).
[T]: To make subjects appear
closer use (Tele)
[W]: To make subjects appear
further away use (Wide)
• The zoom speed varies depending on the
range over which the zoom lever is moved.
Zoom speed will be slower than normal when
recording a motion picture.
3 Focus lever
Move the Focus lever to the
A
or
B
.
A
: Focus on the subject close
by
B
: Focus on the subject far
away
• Speed to focus will change depending on the
amount moved.
4 Contact points
5 Lens fitting mark
To Next Page
Loading...
