➢
Pull mains lead out of canister to
desired length.
➢
The mains lead will not rewind until the
rewind button is pushed.
➢
Plug the mains lead into a mains socket
located near the floor.
To rewind:
➢
Unplug the vacuum cleaner.
➢
Hold the plug while rewinding to prevent
damage or injury from the moving cord.
➢
Push rewind button.
On-Off Switch
➢
To turn vacuum cleaner on or off, press
on the on/off switch.
TO OPERATE VACUUM CLEANER
Mains Lead
Telescopic
Wand
Floor
Brush
Quick
Release
Pedal
Floor Brush
➢ Insert wand into floor brush until the
wand button snaps into place.
To remove:
➢ Press quick release pedal and pull the
wand straight up and out of floor
brush.
- 7 -
To Next Page
Loading...
