Floor Brush
➢ Insert wand into floor brush until the
wand button snaps into place.
To remove:
➢ Press quick release pedal and pull the
wand straight up and out of floor
brush.
- 6 -
➢ Insert handle into wand until lock
button snaps in place.
To remove:
➢ Press handle quick release button and
pull up on handle.
➢
To adjust, simply push down on the wand
and slide the wand to the desired height.
ASSEMBLY
➢ Tilt the canister back.
➢ Align the hose latch tab and notch in
canister and insert hose into canister
until it snaps in place.
To remove:
➢ Press hose latch tab inward and pull
out on hose.
To Next Page
Loading...
