To Next PageTo Next PageWhy does my Panasonic MK-MG1560WTN keep stopping when I'm grinding meat?
Your Panasonic Meat Grinder might be stopping because the meat is too hard, you're feeding too much meat at once, or you've been using it continuously for too long. Remove the hard meat, reduce the meat feed rate, and follow the specified operating time. Also, the circuit breaker might be activated; switch the grinder off and on again to reset it.
Why is my Panasonic Meat Grinder so loud and grinding meat slowly?
If your Panasonic Meat Grinder is running too noisy and grinding meat too slowly, the carbon brush, gears, cutting blade, or cutting plate might be worn out or damaged. Consider replacing the carbon brush, gears, cutting blade, or cutting plate.
What to do if my Panasonic Meat Grinder won't start?
If your Panasonic Meat Grinder fails to start, the power cord may be broken, the lead wire terminal or the switch may be in poor contact, the carbon brush might be worn out, or the A.C. motor coil might be broken. You should replace the power cord, repair or replace the lead wire terminal, replace the switch, replace the carbon brush or replace the A.C. motor.
Why is the feed screw on my Panasonic MK-MG1560WTN Meat Grinder not turning?
If the A.C. motor is running but the feed screw isn't turning on your Panasonic Meat Grinder, the gears or feed screw might be worn out or damaged. Replace the gears or the feed screw.
What causes unusual noise when running my Panasonic Meat Grinder?
Unusual noise from your Panasonic Meat Grinder could be due to foreign matter caught in the gears or worn-out/damaged gears. Remove any foreign matter or replace the gears.
Why does my Panasonic Meat Grinder smell like it's burning?
A burning smell from the A.C. motor of your Panasonic Meat Grinder indicates that the A.C. motor insulation has degraded. Replace the A.C. motor.
Step-by-step guide for removing the meat grinder's motor housing and its components.
Instructions for taking apart the meat grinder's motor unit and associated parts.
Procedure for safely removing the meat grinder's switch knob assembly.
Detailed steps for disassembling the meat grinder's gear box components.
Diagnosing and resolving issues where the AC motor stops during meat feeding due to overload.
Identifying causes and solutions when the meat grinder's AC motor does not start.
Resolving problems where the AC motor runs, but the feed screw fails to rotate.
Addressing noisy operation and slow meat grinding issues with the AC motor.
Diagnosing and fixing causes of unusual running noises from the meat grinder's AC motor.
Identifying and rectifying a burning smell originating from the meat grinder's AC motor.
Visual representation of all meat grinder components in an assembled view.
Guidance on how to properly pack the meat grinder components for storage or shipping.
Comprehensive list of all replaceable parts for the meat grinder with part numbers.
General| Brand | Panasonic |
|---|---|
| Model | MK-MG1560WTN |
| Category | Meat Grinder |
| Language | English |
