Panasonic NA-F70S7

Maintenance
13
Water supply  lter
If water does not  ow smoothly
● Follow the procedure below to prevent
splashing of water.
1
After turning off both hot and
cold water faucets
Turn the
power on.
2
Select Hot or Warm.
3
Start.
4
After approx. 40 seconds
Turn the power off.
5
Loosen the nut
and remove the
hose.
HOT WATER
COLD WATER
6
Remove the  lter and remove
dirt on the  lter.
HOT WATER
COLD WATER
Water supply  lter
7
Reattach the  lter to its
original position.
Tub
Once a week <Air Dry>
1
After operation ends
Run the Air Dry program without
loading laundry. (P. 11)
Once a month <Tub Hygiene>
Preparation: Turn on the water faucet.
1
Without loading laundry
Turn the power on.
2
Select the Tub
Hygiene program.
3
Start.
When the tub is  lled with water
Pause.
4
Put bleach in the tub.
● Use whiten bleach
(chlorine bleach).
Approx. 200
ml
5
After closing the lid
Start.
After approx. 2 hours
and a half, tub cleaning
ends.